cRIO setup issue

[Mastonevich]

One other note I found. I had the connections to the cRIO working fine after initial install. At some point you have register with NI to complete their process which I thought I had done. Then our connections stopped working with your same error. Through troubleshooting I finally restart our programming laptop, and it came up with the registration again. It required the fill in more required fields on the NI registration. From that point forward everything started working.

[ebarker]

Yes indeed - 'disable' all network interfaces, wireless, extra wired, bluetooth, hamachi, and anything that looks like an network interface.

If you do not disable all that then variations occur between PC's depending depending on the local PC configuration and how things are timing out in the NI software. That is why some computer work and some done. It depends on whether it can find the cRio before the timeouts occur.

So just do it to procedure and it will be fine. One day we will get an update that improves things, one day.