|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
|||
|
|||
|
Re: Key-Way for Gates Sprockets
While not the correct way, we have been using the drill press to broach 1/8 and 3/16 key ways. This year we have a press. Note hardened sprockets and gears are nearly impossible to broach. Annealing the hub with a torch thru the bore worked last year.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|