2012 Fisher Price motors with GEM gearbox

[Ninja_Bait]

I imagine you could actually do something similar to the AM Planetary conversion. Buy the right sun gear to press onto the FP and make a mounting plate that will give you the CIM's bolt holes. Unless there is some limitation on speed or torque you can input into the GEM, I don't see why this kind of thing isn't possible.

[Chris is me]

Originally Posted by Ninja_Bait

I imagine you could actually do something similar to the AM Planetary conversion.

The AM Planetary output is the CIM input size. Since the AM Planetary has the same ratio, why wouldn't you use that?

[Ninja_Bait]

Originally Posted by Chris is me

If you want to use an FP with the GEM gearbox, you'd need to use the CIM-SIM or the AM Planetary to "convert" the gearbox output to a CIM.

This is certainly a valid method, but not useful if you don't want to convert your FP to a CIM, i.e. you want to use the GEM directly with the speeds and torques that the FP normally outputs, not something geared to replicate a CIM.

Originally Posted by Chris is me

The AM Planetary output is the CIM input size. Since the AM Planetary has the same ratio, why wouldn't you use that?

Same ratio as what? If you wanted to use the 3.67:1 ratio of a GEM 500 gearbox with an FP, it wouldn't be very helpful to put an AM Planetary in between (now you have ~10:1 ratio).

[Chris is me]

Originally Posted by Ninja_Bait

Same ratio as what? If you wanted to use the 3.67:1 ratio of a GEM 500 gearbox with an FP, it wouldn't be very helpful to put an AM Planetary in between (now you have ~10:1 ratio).

The AM Planetary also has a 3.67:1 ratio. Different gear sizing, same reduction.

[Ninja_Bait]

Oh, I see what you mean.

I think the OP needs to tell us why the GEM is being considered...

[seinchin]

We would like to gear the FP down to ~5000 rpm for use in a shooter. The AM planetary has the same reduction as the GEM -- unfortunately, it's currently out of stock.