image processing with javacv and smart dashboard

[Patrickwhite]

By default, the Axis camera will not show images to the Smart Dashboard.
You must change the settings on the camera to allow anonymous viewing. After that, if the IP of the camera is set (make sure View > Editable is checked then right click the camera and select Preferences) you should start seeing images.

The wiki page of the SmartDashboard has some useful information, including how to make your own extensions.

[kevint]

Thanks the anonomous request thing was the problem. That's perfect. On a similar note I found out were to get the jar file I needed. They were on the left >_< http://code.google.com/p/javacv/

[Ian McShane]

Originally Posted by Patrickwhite

By default, the Axis camera will not show images to the Smart Dashboard.
You must change the settings on the camera to allow anonymous viewing. After that, if the IP of the camera is set (make sure View > Editable is checked then right click the camera and select Preferences) you should start seeing images.

The wiki page of the SmartDashboard has some useful information, including how to make your own extensions.

How do you change the settings for anonymous viewing

[Mark McLeod]

Use a web browser to browse to he camera's IP address
Login is username: FRC Password: FRC
Go to Setup and there will be a check box for autonomous viewing

[Mark McLeod]

The check box is found under

Setup->System Options->Security->Users
Enable anonymous viewer login

Here's a screen shot of the page on the Axis M1011. It's similar on the older Axis 206 camera.