|
|
|
 Only think of Gracious Professionalism as a standard to work toward personally. Never use it as a gauge to point out someone else’s shortcomings.
- Rich Kressly [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Only think of Gracious Professionalism as a standard to work toward personally. Never use it as a gauge to point out someone else’s shortcomings.
- Rich Kressly [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Drive chains legality?
Ok so we are using a mecanum drive on a wide bot. [] like that We have supports welded 4.25 inches inside each edge of the frame, basically encasing the mecanum wheels. Now we want the sprocket on our mecanum wheels towards the out side of this setup. So it will be inside the frame perimeter but we were wondering if this would be considered unsafe. Sorry if I spelled mecanum wrong they didn't teach us that in school...
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode