|
|
|
 FIRST cannot enforce Gracious Professionalism on the participants in this program, you will have to do it on your own. - Ken Leung [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| FIRST cannot enforce Gracious Professionalism on the participants in this program, you will have to do it on your own. - Ken Leung [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Polycord
This year, we are thinking of using polycord to get balls from the ground, to our ball manipulator/mechanism. I know a lot of teams have used polycord before for this task in previous games, but I was not sure the best way to implement it. Would you suggest using polycord pulleys, or do you have some other proven methods that you think work better?
|
|
#2
23-01-2012, 02:23
|
||||
|
||||
|
Re: Polycord
Hey, Michael
I really suggest your looking at the 1836 '09 robot. It implemented the Urethane belts fairly well. IIRC it used 2.5" Delrin turned to have 4 grooves for the pulleys with a 1/2" Keyed bore. 1515 is going with 2.5" ABS with riveted AM Wedgetop tread. Last edited by msimon785 : 23-01-2012 at 02:24. Reason: Unnecessary capitalization. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
