|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
|
||||
|
||||
|
Re: Polycord
Hey, Michael
I really suggest your looking at the 1836 '09 robot. It implemented the Urethane belts fairly well. IIRC it used 2.5" Delrin turned to have 4 grooves for the pulleys with a 1/2" Keyed bore. 1515 is going with 2.5" ABS with riveted AM Wedgetop tread. Last edited by msimon785 : 23-01-2012 at 02:24. Reason: Unnecessary capitalization. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|