|
|
|
 While the Banners initiate the outreach, eventually, the outreach becomes the Banner. - MysterE [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| While the Banners initiate the outreach, eventually, the outreach becomes the Banner. - MysterE [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#13
23-01-2012, 07:40
|
|||
|
|||
|
Re: Kit Chassis
The flaw* with the kit chassis is the length of the axles between supports (the two c channels) makes it susceptible to damage from hard vertical impacts on the wheels. Two possible fixes for this are to increase the axle size to 1/2" or to move the two c channels closer together (reducing the bending moment on the axle from any given load on the wheels).
*Flaw in this case refers to a structural limitation, not a fatal mechanical design oversight. Last edited by GUI : 23-01-2012 at 08:01. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode