Setting RPMs on motors

[Ether]

Originally Posted by davidthefat

You can use a PID Controller and use RPM as the unit.

Your post is shown in the "threaded display mode" as being a response to my post#14. Was that intentional or inadvertent?

[RyanN]

Heck, with CAN now fully going and err... reliable?... you can use the Jaguar's Speed interface to control RPM.

It's legal this year, and it takes some of the overhead out of the programming, as well as making it respond better.

Just an idea.

I think Team Fusion is going this route.

[Ether]

Originally Posted by RyanN

you can use the Jaguar's Speed interface to control RPM.

http://www.chiefdelphi.com/forums/sh...84&postcount=5

[davidthefat]

Originally Posted by Ether

Your post is shown in the "threaded display mode" as being a response to my post#14. Was that intentional or inadvertent?

Unintentional; I just use the "quick reply" button, so I just click the closest one.

[Ether]

Originally Posted by davidthefat

I just use the "quick reply" button, so I just click the closest one.

Friendly suggestion: You might want to rethink that habit. Without any context in your post, the only clue regarding what you are responding to is the hierarchy in the threaded display mode.