How do you reset Axis 206 camera

[AndresC]

I tried holding both buttons on the back of the camera but it did not return to the original ip address 192.168....Instead it had an ip of 172.20....It is not allowing me to get into the cameras settings. Any suggestions to solve this issue.

[plnyyanks]

Unplug it, hold the button on the back, and plug it back in at the same time.

[Doug Norman]

Originally Posted by plnyyanks

Unplug it, hold the button on the back, and plug it back in at the same time.

And then let go of the button when the face light comes on.

[AndresC]

Originally Posted by plnyyanks

Unplug it, hold the button on the back, and plug it back in at the same time.

Originally Posted by Doug Norman

And then let go of the button when the face light comes on.

I read the manual and did all this but the ip address still does not return to the default ip address.

[Mark McLeod]

Try holding the button even longer.
Wait for the face light to come on then about 30 seconds later it will blink once.
Try releasing it after that.