Simulating Field Lighting Conditions

[Chris Hibner]

The retro-reflective tape is very good at only reflecting light back to it's source. That means if you shine a colored light that is right next to the camera at the tape, your camera should only see that color coming from the tape. A ring light that is placed around the lens works best. We've experimented with a ring light and even in horrible lighting conditions (by horrible, I mean bright lights all around and behind the target), the camera was able to pick up the tape quite reliably.

[RufflesRidge]

Make sure to read through the Vision Whitepaper settings on camera settings, it describes some ways to set the white balance and exposure settings that should minimize the effects of changes in lighting.

[MentorOfSteel]

Thanks all for the tips. We are using the light ring that came with FIRST choice this year, and it works extremely well in our not-well-lit practice field. I'll get a random selection of brighter lights for further testing.

-George