CAN problems

[Alan Anderson]

Originally Posted by zekrysis

ERROR <Code> -1073807246 occurred at NetComm_CAN_Send.vi:3
VISA: (Hex 0xBFFF0072) The resource is valid, but VISA cannot currently access it.

What you said you did to fix the problem doesn't match what I thought the error indicated. It's been pointed out in other threads that you need to disable the CONSOLE OUT switch on the cRIO if you want to use the Serial-to-CAN gateway plugin.

[zekrysis]

Originally Posted by Alan Anderson

What you said you did to fix the problem doesn't match what I thought the error indicated. It's been pointed out in other threads that you need to disable the CONSOLE OUT switch on the cRIO if you want to use the Serial-to-CAN gateway plugin.

yes I noticed that when I reimaged the CRIO I flipped the switch and retried and got a time out error so I then changed the time out on it only to find out that the jaguars' firmware was out of date. after much searching I finally found the firmware hidden away in a corner on the texas instruments website (honestly they should fire their webmaster, organization on that website is horrible) and after updating can was now working.