|
Re: Gyro example help
Have you verified the wiring to the Analog Breakout board?
You should have a 12V line from the Power Distribution board going to the Analog Breakout board, protected by a 20A breaker. You should see an LED lit on the Analog Breakout board.
Verify that the Gyro is actually getting 5V using a multimeter.
It's extremely uncommon for electronics like this to be defective.
__________________
Garnet Squadron
FRC 4901
Controls Mentor
@rnazaretian
Previous mentor and student from Team Fusion, FRC 364
|
"What we really need to make sure we do is make our robot move." - Barngirl425 [more] 
29-01-2012, 11:50
Hybrid Mode
