|
|
|
 I don't fully buy into the 'we're all winners' concept. That is a broad statement that doesn't really say much. How did we become all winners? What did we do to become winners? Pay an expensive registration fee and participate in a robotic competition? - JaneYoung [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
HELP: No Data Sent Back to Driver's Station
HELP! No data is showing up on the drivers station. The drivers station says that we are communicating with our robot (which is working) but no voltage indications or sensors are showing up! Has anyone else encountered this problem? What do we do?
Last edited by peter1626 : 29-01-2012 at 12:02. 
|
|
#2
29-01-2012, 17:38
|
|||||
|
|||||
|
Re: HELP: No Data Sent Back to Driver's Station
You're saying that the robot moves as commanded, but the Driver Station is not showing the battery voltage? That could be as simple as a missing jumper on the Analog Breakout connected to the cRIO module in slot 1.
I don't know what other sensors you are referring to. Can you be more specific about what you expect to see and what you're seeing instead?
|
|
#3
29-01-2012, 21:09
|
|||
|
|||
|
Re: HELP: No Data Sent Back to Driver's Station
Sorry it appears that this was accidentally double posted, see this thread.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
