|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#10
|
|||||
|
|||||
|
Re: 500s motors on relays?
We ran the two 550's on our roller claw last year through Spikes and never had an issue. With proper gearing you SHOULD be alright as far as current draw goes. We plan on running a 500-series sized motor through a spike again this year but are prepared to swap it out to a Victor if needed.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|