Windriver can't setup remote system - license error

[astroman31]

This Windriver stuff is getting old. This is my third attempt at getting the thing going. I have it installed on a fresh Windows 7 image on a very nice, very fast laptop. Installed both DVDs precisely as instructed. I can FTP the cRIO. I have the IP addresses set. Everything pings. Firewall turned off.

I cannot setup the Remote System connection in Windriver. It gives me licensing errors. Any ideas? The latest error says:

Problems Connecting Target
Step finished with this error: CPU: MPC83xx is not licensed

Target Context: VxWorks6x_10.40.86.2@WINDOWS-CNR8H59
Target Connect Strategy: Wind River VxWorks Target Connect Strategy
Connect Step: Connect DFW

Target Communication Protocol: TCP/IP
Target IP Address: 10.40.86.2
Target Port: 0x4321

[Alan Anderson]

Searching the Chief Delphi forums for "MPC83xx" quickly found this thread. It's short, and it should help you find the step you missed when setting up the connection.

[enrique]

you have to specify the processor as 5200 instead of "default from target".

[jnettleton]

We changed the CPU type to MPC5200 for the cRIO (probably the same for cRIO-II 4 slot version).