|
|
|
 I hope FIRST hurries up and releases the regional schedule soon. I have a vacation schedule to plan. - Koko Ed [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I hope FIRST hurries up and releases the regional schedule soon. I have a vacation schedule to plan. - Koko Ed [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: crio not communicating with digital io module/sidecar
Sorry, I did search and had found the threads regarding the faulty ribbon cables...we are not using that cable...using the db37 cable from last year.
|
|
#2
31-01-2012, 14:03
|
||||
|
||||
|
Re: crio not communicating with digital io module/sidecar
threads all over the place
2 problems. DB37 cable digital I/O goes in slot two, new arrangement for this year
|
|
#3
31-01-2012, 15:23
|
|||
|
|||
|
Re: crio not communicating with digital io module/sidecar
Right...I have the module in slot 2 and I am not using the faulty ribbon cable. Any other recommendations? This is pretty frustrating because I am not one of those guys who fails to read directions and I thought I had done my homework here. Had already identified changes this year regarding the new slot for digital I/O and the faulty ribbon cable. Applied all of the applicable updates, etc. Currently at a loss here. Any help would be greatly appreciated. Several references to alot of other posts, are they in a different forum other than control system?
|
|
#4
31-01-2012, 22:27
|
|||||
|
|||||
|
Re: crio not communicating with digital io module/sidecar
How are you providing power to your Digital Sidecar? Are the BATT and +5v LEDs lit?
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
