Code deploys but does not save to cRIO

[Mark McLeod]

1. Right-click on "Build Specifications"
2. Choose New -> Real-Time Application
3. Give it any name "Build specification name"
4. Click "Source Files" in the left Category column
5. Choose your Main vi from the Project Files list
6. Click the blue arrow next to the "Startup VIs" box. (That will put the Main vi in the Startup VIs box
7. Click "OK" at the bottom

You should now see your new real-time application specification for the cRIO listed under Build Specifications, and you can do a "Build", followed by "Run as startup".

Did you start from a normal default Robot Project, or do you just want to download an example permanently?
The examples don't normally have a Build Specification, but the default code that you should really begin with, does.

[cyberdogs4257NM]

Thanks. We figured it out.