|
|
|
 Although it took me a little while to find my niche in the program, every moment spent has been one great memory after another. - Amanda Morrison [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Although it took me a little while to find my niche in the program, every moment spent has been one great memory after another. - Amanda Morrison [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
How do we get the scroll wheels (behind buttons 8 and 9) on the attack3 to interface?
We want to use them as a way of controlling the max power, but we have no idea how to get data from them. Anyone know?0
|
|
#3
02-02-2012, 10:02
|
||||
|
||||
|
Re: How do we get the scroll wheels (behind buttons 8 and 9) on the attack3 to interf
Yes. It is axis 3 on your joystick.
All you have to do is to unbundle the joystick and then "select" axis 3 from the context menu on the unbundle by name. Important! Check the value on the scroll wheel as it could go past 1 or -1 which is really bad for motor control (since they only go to these values)
|
|
#5
05-02-2012, 02:04
|
|||
|
|||
|
Re: How do we get the scroll wheels (behind buttons 8 and 9) on the attack3 to interf
If you take the value of Axis 3 and add 1 then divide by 2, it changes the scale from [-1, 1] to [0, 1]. Just a helpful hint if you wanted to use it to control one direction of a motor.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
