|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Crio doesn't find Camera images
Hello,
So I set up the camera with the camera setup utility, to connect through the router. (10.xx.yy.11). The problem is that I can see the image on the dashboard, but my code doesn't find the image. I know this sounds kind of weird, but when I used "camera.getImage();" it doesn't return an image and I get a null pointer exception error. Any Ideas? |
|
#2
|
|||
|
|||
|
Re: Crio doesn't find Camera images
I've got the exact same problem, anyone know what's going on?
|
|
#3
|
|||
|
|||
|
Re: Crio doesn't find Camera images
Quote:
|
|
#4
|
|||
|
|||
|
Re: Crio doesn't find Camera images
thanks for your reply, but I found the problem. First make sure your camera is set to "10.te.am.11", than make sure it is plugged into the d-ling bridge. Then in the code, make sure instead of the plain .getInstance(); use the .getInstance("10.te.am.11"); so the crio can communicate with the camera. Also set the Camera up with the updated setup utility.
|
|
#5
|
|||
|
|||
|
Re: Crio doesn't find Camera images
Thanks so much cooltext! I'll try this out as soon as i can. too bad we already reset the camera and now have to reconfigure it...
|
|
#6
|
||||
|
||||
|
Re: Crio doesn't find Camera images
We've been through all of these steps as well. We can access the camera, but the image return from GetImage() has 0 width and 0 size.
Suggestions? |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|