Cypress Board not recognized by non-classmate

[Cecil]

Did you reprogram the Cypress with the programmer and the hex file installed with the utilities update? Without this, it won't be recognized.

[Wendy Holladay]

we did

[Wendy Holladay]

We got our cypress board working. The problem started we believe when we used the vendor supplied DVD as a starting point.

We ended up fixing the problem from an extremely helpful post on first forums, giving dll sizes. When we deleted the dll and replaced it with one from the classmate, using the file sizes as a guide, all worked.

We have made all the driver's station updates. We assume the vendor DVD put a bad dll out there.

thanks to all who helped.

i still like the board from estop robotics better, it works everytime, no issues.

[jhersh]

Originally Posted by Cecil

Did you reprogram the Cypress with the programmer and the hex file installed with the utilities update? Without this, it won't be recognized.

The files actually come with the driver station update.

[Cecil]

Originally Posted by jhersh

The files actually come with the driver station update.

My bad.. I knew it was one or the other..
Hence my signature