Flashing Yellow Jaguar

[techno4229]

ok we are rookie team and im having problems with the motor controls im using labview but when i leave everything on defualt when i followed tutorial i ran the file and it said everything was working but i get a yellow flashing light in the black jaguar and when i use the joysticks nothing happens to the motors any help vets or anyone who knows what to do???

[EricH]

Check your connections. The yellow flashing light on the Jaguar means no signal.

Some other things to check:
--DB37 cable from the second module to the Digital Sidecar
--PWM orientation from Sidecar to Jaguar (had that with a team last week)
--Robot code loaded
--Robot enabled in teleoperated

What is the RSL LED on the Sidecar doing?

[dyanoshak]

Some of the ribbon cables in the kit were not assembled correctly:

Originally Posted by dyanoshak

Also, check to make sure that your ribbon cable was assembled correctly. See this document from the FIRST website: DB37 Ribbon Cable Assembly Rework Instructions

This was posted in the team updates, be sure to follow them!

[KennyLives]

Learn to speak English Then you may want to check your ribbons, as there were some defective ones sent out.

[techno4229]

Originally Posted by EricH

Check your connections. The yellow flashing light on the Jaguar means no signal.

Some other things to check:
--DB37 cable from the second module to the Digital Sidecar
--PWM orientation from Sidecar to Jaguar (had that with a team last week)
--Robot code loaded
--Robot enabled in teleoperated

What is the RSL LED on the Sidecar doing?

um...

--PWM orientation from Sidecar to Jaguar (had that with a team last week)
--Robot code loaded

i need help loading the robot code i enable in teleoperated and it for the main drive any clue what to do?