|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: I woke up...and discovered CAN
The CAN bus and the Jaguars are a unique challenge. Many of the problems you'll see can be overcome fairly easily (once you find them)...but not if you're in a hurry. I don't encourage anyone with limits to their patience or available time to try them casually. You'll end up REALLY disliking them if you plan poorly for this and possibly a bit unfairly to them in general.
That being said...I don't advise people to fall asleep in: datasheets, on robots or in the box of the KOP. These would seem to be the places you'll most likely wake up and discover CAN. Safety first you know.Last edited by techhelpbb : 03-02-2012 at 15:13. |
|
#2
|
|||
|
|||
|
Re: I woke up...and discovered CAN
The only error I had been having is lack of connection to the cRIO. I can talk to it from the computer fine, but the cRIO Java implementation gives me an error message about the CAN interface not connecting. Otherwise, it seemed pretty self explanatory. (No, still haven't fixed it, nothing on the error message around).
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|