|
#16
|
||||
|
||||
|
Re: How much does your robot weigh?
We are at 70 lbs in cad.
And that is without electronics and pneumatic [no compressor]. We should be just about 110 fully loaded. |
|
#17
|
||||
|
||||
|
Re: How much does your robot weigh?
(Read in a sarcastic, monotone voice)
Yes, It's not like I bolded anything. ![]() |
|
#18
|
|||
|
|||
|
Re: How much does your robot weigh?
Quote:
![]() |
|
#19
|
|||
|
|||
|
Re: How much does your robot weigh?
o.O i JUST DECIDED THE SAME THING 5 MINUTES AGO. WE AR HAVING ALL ELCTRONICS ON OUR SHOOTER TOWWER WITH THE BATTERY LOCATED DIRECTLY ABOVE THES SHOOTER!!!!!!1!!!1!!
|
|
#20
|
||||
|
||||
|
Re: How much does your robot weigh?
Quote:
![]() |
|
#21
|
|||
|
|||
|
Re: How much does your robot weigh?
BEST. THING. EVER!
That saying just made my day! |
|
#22
|
||||
|
||||
|
Re: How much does your robot weigh?
That HAS to go in my signature!
On an unrelated note, I probably just described myself. Haven't gone on an all caps rage yet, but there's always time... |
|
#23
|
|||
|
|||
|
Re: How much does your robot weigh?
Quote:
![]() |
|
#24
|
|||
|
|||
|
Re: How much does your robot weigh?
no really we don't want our "shooter" flying off the robot and we need the battery weight to hold it down.
|
|
#25
|
||||
|
||||
|
Re: How much does your robot weigh?
The first iteration weighs approximately 120 pounds, without any weight reduction techniques. This is very strange for our team
![]() CAD is a lifesaver. |
|
#26
|
|||
|
|||
|
Re: How much does your robot weigh?
Drive itself is 86 lb, with the electronics board, about 90 lb.
|
|
#27
|
||||
|
||||
|
Re: How much does your robot weigh?
In CAD? 93 lbs + chain and fasteners (should bring it up to about 110).
In real life? About 20. (Yeah we're behind ) |
|
#28
|
|||
|
|||
|
Re: How much does your robot weigh?
Quote:
![]() |
|
#29
|
||||
|
||||
|
Re: How much does your robot weigh?
As of last night, with all major components mounted, approximately 107lbs.
BTW batteries weigh ~13lbs, weight adds up with 6awg wire on the battery though. |
|
#30
|
||||
|
||||
|
Re: How much does your robot weigh?
We are looking at around 70-80 completely finished with no reduction techniques.
and a note to everyone using autodesk- it does have CAD weight issues that can be as high as 20-30 lbs off. Solidworks is around 1-2 lbs off. But in autodesk try to manually enter each parts' weight for a better estimate |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|