Go to Post I’m not decently dressed for this picture.......I have no FIRST shirt, FIRST hat or FIRST pin anywhere on me! - Rich Wong [more]
Home
Go Back   Chief Delphi > Competition > Rules/Strategy
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 08-02-2012, 21:56
Squillo Squillo is offline
Registered User
AKA: Cynthia Hannah-White
FRC #2465 (Kauaibots)
Team Role: Mentor
 
Join Date: Feb 2011
Rookie Year: 2010
Location: Kauai, Hawaii
Posts: 154
Squillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant future
Battery upside-down

There is no rule specifically prohibiting mounting the battery upside down. We have had our battery upside down for several hours without any sign of leakage. It is called a 'non-spillable' battery. It would be helpful if we could mount it this way on the robot.

Do you think the inspectors would ding this as "unsafe"? Or for any other reason?
  #2   Spotlight this post!  
Unread 08-02-2012, 22:19
dez250 dez250 is offline
54... What a good number!
no team
 
Join Date: Dec 2002
Rookie Year: 2000
Location: Upstate NY / Manchester, NH
Posts: 1,721
dez250 has a reputation beyond reputedez250 has a reputation beyond reputedez250 has a reputation beyond reputedez250 has a reputation beyond reputedez250 has a reputation beyond reputedez250 has a reputation beyond reputedez250 has a reputation beyond reputedez250 has a reputation beyond reputedez250 has a reputation beyond reputedez250 has a reputation beyond reputedez250 has a reputation beyond repute
Send a message via AIM to dez250
Re: Battery upside-down

I suggest you take a look at this thread from earlier in the season, a lot of useful information including an answer to your question is in there.
__________________
#5

-Michael Dessingue
  #3   Spotlight this post!  
Unread 08-02-2012, 22:20
MrForbes's Avatar
MrForbes MrForbes is offline
Registered User
AKA: Jim
FRC #1726 (N.E.R.D.S.)
Team Role: Mentor
 
Join Date: Feb 2006
Rookie Year: 2006
Location: Sierra Vista AZ
Posts: 6,033
MrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond repute
Re: Battery upside-down

I would not do it just because it will be cumbersome to remove and install it between matches for charging. There's a "handle" on top of the battery, so you can grip it easily, how will that work if it's upside down?

I guess I'm getting old, I have no sense of humor about battery position and mounting...I like them to be secure, easy to access, easy to connect/disconnect, etc.
  #4   Spotlight this post!  
Unread 08-02-2012, 22:22
Kevin Sevcik's Avatar
Kevin Sevcik Kevin Sevcik is offline
(Insert witty comment here)
FRC #0057 (The Leopards)
Team Role: Mentor
 
Join Date: Jun 2001
Rookie Year: 1998
Location: Houston, Texas
Posts: 3,745
Kevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond repute
Send a message via AIM to Kevin Sevcik Send a message via Yahoo to Kevin Sevcik
Re: Battery upside-down

You can mount the battery on your robot in whatever orientation you like, it won't create any hazards when discharging out of position.

You DO need to charge the batteries only in the upright position. When over charged they can generate gases that need to be vented, which happens best when upright.
__________________
The difficult we do today; the impossible we do tomorrow. Miracles by appointment only.

Lone Star Regional Troubleshooter
  #5   Spotlight this post!  
Unread 08-02-2012, 22:28
Ether's Avatar
Ether Ether is offline
systems engineer (retired)
no team
 
Join Date: Nov 2009
Rookie Year: 1969
Location: US
Posts: 8,125
Ether has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond repute
Re: Battery upside-down


I think it's AGM, but does anyone know for sure what technology is used in this year's battery? On the only datasheet I've been able to find, it doesn't say.

http://www.batteryplex.com/sheets/NP18-12R.pdf

  #6   Spotlight this post!  
Unread 09-02-2012, 02:11
Tristan Lall's Avatar
Tristan Lall Tristan Lall is offline
Registered User
FRC #0188 (Woburn Robotics)
 
Join Date: Aug 2001
Rookie Year: 1999
Location: Toronto, ON
Posts: 2,484
Tristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond repute
Re: Battery upside-down

Quote:
Originally Posted by Ether View Post

I think it's AGM, but does anyone know for sure what technology is used in this year's battery? On the only datasheet I've been able to find, it doesn't say.

http://www.batteryplex.com/sheets/NP18-12R.pdf

They are AGM. (See especially pg. 4 of the second link.)

http://www.enersysreservepower.com/d...S-006_0611.pdf
http://www.enersysreservepower.com/d...M-003_0111.pdf
  #7   Spotlight this post!  
Unread 09-02-2012, 02:42
Ether's Avatar
Ether Ether is offline
systems engineer (retired)
no team
 
Join Date: Nov 2009
Rookie Year: 1969
Location: US
Posts: 8,125
Ether has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond repute
Re: Battery upside-down

Quote:
Originally Posted by Tristan Lall View Post
also on Page 4:
Not recommended for use in inverted “vents down” position

Attached Thumbnails
Click image for larger version

Name:	ventsDown.jpg
Views:	75
Size:	67.1 KB
ID:	11816  
  #8   Spotlight this post!  
Unread 09-02-2012, 10:33
FrankJ's Avatar
FrankJ FrankJ is offline
Robot Mentor
FRC #2974 (WALT)
Team Role: Mentor
 
Join Date: Feb 2011
Rookie Year: 2009
Location: Marietta GA
Posts: 1,946
FrankJ has a reputation beyond reputeFrankJ has a reputation beyond reputeFrankJ has a reputation beyond reputeFrankJ has a reputation beyond reputeFrankJ has a reputation beyond reputeFrankJ has a reputation beyond reputeFrankJ has a reputation beyond reputeFrankJ has a reputation beyond reputeFrankJ has a reputation beyond reputeFrankJ has a reputation beyond reputeFrankJ has a reputation beyond repute
Re: Battery upside-down

I not sure what upside down buys you. It is the same dimension right side up
You also want to install it so that you are not stressing the cable lugs by forces on the battery cables.
  #9   Spotlight this post!  
Unread 09-02-2012, 10:56
Kevin Sevcik's Avatar
Kevin Sevcik Kevin Sevcik is offline
(Insert witty comment here)
FRC #0057 (The Leopards)
Team Role: Mentor
 
Join Date: Jun 2001
Rookie Year: 1998
Location: Houston, Texas
Posts: 3,745
Kevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond repute
Send a message via AIM to Kevin Sevcik Send a message via Yahoo to Kevin Sevcik
Re: Battery upside-down

Quote:
Originally Posted by Ether View Post
also on Page 4:
Not recommended for use in inverted “vents down” position

Vent position only matters when you're charging, though. At high overcharging currents, electrolysis produces oxygen and hydrogen which can build pressure and requires venting. There's no gas production or need for venting at any other time. Those datasheet are just assuming you're using them in a standard application, where a battery is semi-permanently installed and is discharged and charged in place. As long as he isn't charging his battery on the robot, he'll be fine.
__________________
The difficult we do today; the impossible we do tomorrow. Miracles by appointment only.

Lone Star Regional Troubleshooter
  #10   Spotlight this post!  
Unread 09-02-2012, 11:12
Ether's Avatar
Ether Ether is offline
systems engineer (retired)
no team
 
Join Date: Nov 2009
Rookie Year: 1969
Location: US
Posts: 8,125
Ether has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond repute
Re: Battery upside-down

Quote:
Originally Posted by Kevin Sevcik View Post
Vent position only matters when you're charging, though. At high overcharging currents, electrolysis produces oxygen and hydrogen which can build pressure and requires venting. There's no gas production or need for venting at any other time. Those datasheet are just assuming you're using them in a standard application, where a battery is semi-permanently installed and is discharged and charged in place. As long as he isn't charging his battery on the robot, he'll be fine.
I can't argue with you on theoretical grounds, and my guess is you're right about the datasheet assumption.

Nonetheless, I'd follow the manufacturer's recommendation. There might be other reasons for it. To pick one example: Does the vent ever operate during large swings in battery temperature and barometric pressure? (and could that ever cause some sort of acid leakage?) Can any battery gurus comment on this (or other reasons)?

  #11   Spotlight this post!  
Unread 09-02-2012, 12:06
Unsung FIRST Hero
Al Skierkiewicz Al Skierkiewicz is offline
Broadcast Eng/Chief Robot Inspector
AKA: Big Al WFFA 2005
FRC #0111 (WildStang)
Team Role: Engineer
 
Join Date: Jun 2001
Rookie Year: 1996
Location: Wheeling, IL
Posts: 10,798
Al Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond repute
Re: Battery upside-down

In most cases, dangerous gasses are mostly generated during charging. Although normal use (discharge at 1/10-1/2 C) shouldn't produce increased pressure within any cell, our use can cause some additional heat to be generated. While acid leakage is not a huge concern, these batteries do tend to produce some internal condensation. If the battery is used upside down, and the internal pressure were to cause a vent to open, some of this condensation would be lost. Over time, this will reduce the available current from a given cell.
My usual recommendation is never charge upside down and don't use upside down if at all possible. When the battery is inverted, you can see where the terminals are located in relation to the robot structure or other electrical connections. This is a possibility for battery failure either through shorting to structure or damage to the terminals on the battery.
One must remember that this battery is manufactured such that a variety of terminations can be used with the same basic battery configuration. The terminals on our battery simply push over two round terminals inside the battery and then are soldered in place. It is possible to break the solder bond internally without any visible external damage. The result is significant voltage drop and heat. The battery may test good with a voltmeter, it may even charge normally but will fail either intermittently or through voltage drop on the field.
Finally, I have to remind all teams that securing the battery is part of the inspection checklist. You have to demonstrate this during inspection. If you are on the field and the battery drops out of your robot, you will be disabled for the remainder of the match.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
  #12   Spotlight this post!  
Unread 09-02-2012, 12:23
Ether's Avatar
Ether Ether is offline
systems engineer (retired)
no team
 
Join Date: Nov 2009
Rookie Year: 1969
Location: US
Posts: 8,125
Ether has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond repute
Re: Battery upside-down

Quote:
Originally Posted by Al Skierkiewicz View Post
While acid leakage is not a huge concern, these batteries do tend to produce some internal condensation. If the battery is used upside down, and the internal pressure were to cause a vent to open, some of this condensation would be lost. Over time, this will reduce the available current from a given cell.
My concern was more centered around safety than reducing available current over time. Student gets trace acid on hands; rubs eyes; medical emergency.

  #13   Spotlight this post!  
Unread 09-02-2012, 15:29
Squillo Squillo is offline
Registered User
AKA: Cynthia Hannah-White
FRC #2465 (Kauaibots)
Team Role: Mentor
 
Join Date: Feb 2011
Rookie Year: 2010
Location: Kauai, Hawaii
Posts: 154
Squillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant futureSquillo has a brilliant future
Re: Battery upside-down

Thank you all very much for your thoughts and info. Sorry I didn't think to search first - it never crossed my mind that anyone other than my nutso electronics team would have come up with such a crazy idea.
  #14   Spotlight this post!  
Unread 09-02-2012, 15:41
nitneylion452's Avatar
nitneylion452 nitneylion452 is offline
Registered User
AKA: Joe Lee
FRC #3167 (Environmental Tectonics Crusaders)
Team Role: Mentor
 
Join Date: Jan 2010
Rookie Year: 2010
Location: Philadelphia, PA
Posts: 596
nitneylion452 has much to be proud ofnitneylion452 has much to be proud ofnitneylion452 has much to be proud ofnitneylion452 has much to be proud ofnitneylion452 has much to be proud ofnitneylion452 has much to be proud ofnitneylion452 has much to be proud ofnitneylion452 has much to be proud of
Re: Battery upside-down

Quote:
Originally Posted by Squillo View Post
Thank you all very much for your thoughts and info. Sorry I didn't think to search first - it never crossed my mind that anyone other than my nutso electronics team would have come up with such a crazy idea.
This is ChiefDelphi. We're all a little nusto.
__________________
Joe
"The ones who will one day rule the world rule the basketball court today."

http://www.fatherjudgerobotics.webs.com

Volunteer 2012 MAR Region Championship - Field Reset
Volunteer 2013 MAR Region Championship - Field Reset
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:37.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi