Axis Camera Stream without cRIO

[nighterfighter]

Originally Posted by Mark McLeod

Put one camera on 10.17.71.11
The other on 10.17.71.12

Plug both into the DLink.
Devise a way to give both 5v power feeds on the robot.

Create a Dashboard project and change the camera IP address to 10.17.71.12
If you want both cameras displayed on the Dashboard, then you can duplicate the code for the original camera and change that IP address to the 2nd camera.

Thanks, I set the IP to be 10.17.71.12, with a default gateway of 255.255.255.0 One other field it asked for was the default router- it was originally 192.168.0.1, so I set it to be 10.17.71.1, would that be correct?

Also, we don't know LabView very much, (we can open the program and pull up an example), how do you change the value on the camera dashboard?

Thanks!