|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Gyro
How would I wire up the gyro? Where would I connect the gyro to? Thanks in advance.
|
|
#2
|
||||
|
||||
|
Re: Gyro
Hook the gyro to an analog input channel. 3 pins: +5 to +5, Gnd to Gnd and ANA to signal.
|
|
#3
|
||||
|
||||
|
Re: Gyro
If you're using the KOP gyro, remember to use the RATE pins, not the TEMP ones.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|