Java to Crio Downloading Issues

[jesusrambo]

Open up your netbeans settings, click the miscellaneous tab, click the FRC Java tab, and set your team number in there.

[austin1743]

thanks, we have done that and will test it in a few hours. I will respond back if it works.
when we set it in netbeans we got set remote address to (10.17.43.2) which i am going to assume is correct?

also...
using command prompt and the ipconfig command,

we have the:
IPv4 - 10.10.12.154
subnet - 255.255.0.0
default gateway 10.10.0.1

we are team 1743 so i know it should read (10.17.43.6) there...

but i am unaware of what it should correctly read.... Can someone post up an accurate example of exactly how it should be?

[Patrick Chiang]

Originally Posted by austin1743

thanks, we have done that and will test it in a few hours. I will respond back if it works.
when we set it in netbeans we got set remote address to (10.17.43.2) which i am going to assume is correct?

also...
using command prompt and the ipconfig command,

we have the:
IPv4 - 10.10.12.154
subnet - 255.255.0.0
default gateway 10.10.0.1

we are team 1743 so i know it should read (10.17.43.6) there...

but i am unaware of what it should correctly read.... Can someone post up an accurate example of exactly how it should be?

What is your exact setup? If you use the wireless router on the robot as an access point, you don't need to configure the default gateway on your computer. Disable DHCP on the router and manually change your address to 10.17.43.x, where x is an integer 0~255 and not 1, 2, 4 or 6, or 11 (to be safe).

[austin1743]

so we fixed the ip address issue (thanks for the help)

now we got another issue (lol)

we are getting an error where it says looking for frc_2012_v43.zip but got frc_2011_v28.zip

we tried looking for where it is calling for this file path but we couldn't find it... our netbeans is updated to the fullest and has all of the plug-ins installed...

[Patrick Chiang]

Originally Posted by austin1743

so we fixed the ip address issue (thanks for the help)

now we got another issue (lol)

we are getting an error where it says looking for frc_2012_v43.zip but got frc_2011_v28.zip

we tried looking for where it is calling for this file path but we couldn't find it... our netbeans is updated to the fullest and has all of the plug-ins installed...

Two things you should try:
1. Update your cRio flashing utility. The 2012 version has some major changes done to it.
2. Uninstall, reinstall the plugins in netbeans. Those plugins *should* contain the cRio image files.

[austin1743]

ok the flash utility is just the cRio imager correct?

our netbeans is currently up to date with all of 2012's updates for frc.

will keep you guys informed..


we are using wired connection right now and trying to get that set-up before wireless...