Java to Crio Downloading Issues

[Patrick Chiang]

Originally Posted by austin1743

thanks, we have done that and will test it in a few hours. I will respond back if it works.
when we set it in netbeans we got set remote address to (10.17.43.2) which i am going to assume is correct?

also...
using command prompt and the ipconfig command,

we have the:
IPv4 - 10.10.12.154
subnet - 255.255.0.0
default gateway 10.10.0.1

we are team 1743 so i know it should read (10.17.43.6) there...

but i am unaware of what it should correctly read.... Can someone post up an accurate example of exactly how it should be?

What is your exact setup? If you use the wireless router on the robot as an access point, you don't need to configure the default gateway on your computer. Disable DHCP on the router and manually change your address to 10.17.43.x, where x is an integer 0~255 and not 1, 2, 4 or 6, or 11 (to be safe).