Problems using CAN with PID

[Patrick Chiang]

Originally Posted by gpetilli

Agreed you must switch to kSpeed. You will need different P I D numbers when you switch to kSpeed. For tuning speed mode, start with the I number (not P as you would for kPosition). Once you have an I you like, you can ramp up P to tame minor oscillations. Always set D to zero in speed mode. There are several posts which give more details on tuning CANJaguar kSpeed controllers.

Wait a second. Why does D have to be set to 0 in speed mode? Ours seem to work best with P=.700, I=.085, D=5.000

[LukeS]

Originally Posted by Patrick Chiang

Wait a second. Why does D have to be set to 0 in speed mode? Ours seem to work best with P=.700, I=.085, D=5.000

It varies, there are different strategies. This year I've had good luck with speed control using the Ziegler-Nichols method (search it) with P and I (no D).