|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
|
||||
|
||||
|
Re: Programming Ball Feeder and Launcher
The MotorControl Set Output VIs take inputs ranging from -1 to 1, with -1 being full speed in one direction and 1 being full speed in another, depending on if the motors are inverted. All single motors use the same VI pallete, so you shouldn't need to specify a Fisher-Price or window motor in the code
Further information here: https://decibel.ni.com/content/docs/DOC-8923 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|