|
Re: Team 3316 Preview!
Quote:
Originally Posted by EngiGirl1053
The robot looks great, my team used the same concept for VEX Gateway this year and it worked great. I just wanted to make sure that you guys had looked into rule R02:
[R02]
The Robot must satisfy the following size constraints:
a.horizontal dimensions must not exceed 28 by 38 in.,
b.the absolute height must not exceed 84 in.,
c.the height of the Robot at the start of the match must not exceed 60 in.,
d.any appendage may not extend more than 14 in. beyond the frame perimeter, and
e.no other part of the Robot may extend beyond the vertical projection of the Frame Perimeter (with the exception of minor protrusions permitted per [R01-2]).
Specifically, d and e. When your arm is going up, it is going way out of the 14" allowed from the perimeter.
|
It looks less than a foot outside the perimeter.
__________________
1592(Student and Mentor) 2007-2012
Blue Banners: 2008 Colorado, 2012 Orlando, 2012 South Florida, 2014 Orlando, 2015 Buckeye
Mechanical Engineering - University of Central Florida(Class of 2016)
|
This is an Internet forum- if you want to relax, sit next to a pool and sun bathe. However, the rest of us will have a mature discussions and debates on the CD forums. - MikeDubreuil [more] 
Threaded Mode