pic: Shaker Robotics Shooter

[JackS]

Originally Posted by Taylor

Underscored for truth.
We have our camera mounted on the same platform as our turreted shooter; the vibrations are quite severe.

Is there a known remedy for this problem? Perhaps mounting the camera on some foam to try and reduce the vibrations?

[MrForbes]

I'm guessing we're going to discover the camera vibration issue some time tonight...should be entertaining.

[Sh1ine]

Originally Posted by CalTran

Oh. Those do not need air adjustment. I like that idea then. Next question would be what system would be used to know the placement of the hood? First thought would have been a pot or an encoder, but I'm not sure where one would be mounted to be used.

If you look at the render there is a piece of aluminum that is bent on the right hand side as you look at it. A pot will be inserted in there and held in place with a simple piece of Lexan and double sided tape attached to the base (not shown here)