|
|
|
 I thought of this at least a couple of years ago, but I didn't post because I didn't want to give Dave any fiendish ideas. He has enough without our help. - ChrisH [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Jaguars not functioning with CIM motors
You mentioned you were using chains to drive the wheels. Do you know what kind of gearbox and/or what sprocket sizes you're using on the motor side and on the wheel side? It's possible your drive train is geared too fast, and the CIM motors can't pull enough current to accelerate before the jaguars enter the over-current protection mode.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
