Banebots 775 Pinion Specs

[Phalanx]

Well to respond to my own post and to share with anyone else who might was this information. After emailing Banebots I received the following response:

"The gear is module 0.6 (not DP) with a 20 degree pressure angle."

Now if I understood things correctly. To convert the module (Mod) to DP
It's divide 25.4 by the module: 25.4 / 0.6 = 42.33DP

Alternatively, if I get time, I might try:
Divide number of teeth + 2 by the outside diameter
DP = (N+2)/OD

and compare my results.