Quote:
Originally Posted by Mark McLeod
Check your PWM cable polarity.
Try switching the PWM cable from one of the working Jaguars to the blinking one to see if it gets signal and goes solid.
As long as the code performs an Open for the Jag, then the Jag light should be solid when the robot is Enabled.
|
We have reversed the PWM cables, I've changed the code from Jag to Victor, nothing has worked. We're using the provided Sidecar from 2012 year, and for some reason, PWM 5 isn't working. Do I have to add in Digital Module 2 on the cRIO slots to work PWM's 5-8?
Just because you haven't witnessed parts leaving the flywheel yet, doesn't mean it won't happen. - Al Skierkiewicz [more] 
14-02-2012, 16:06
Re: 1 Motor in LabVIEW?
Threaded Mode