Instructions on crio Ftp

[iceberg_ssj]

Can anyone one provide me with instructions on how to ftp to the crio. I am trying to get the java vision target example working and I need to put the sample images on the crio.

[Chris Hibner]

Originally Posted by iceberg_ssj

Can anyone one provide me with instructions on how to ftp to the crio. I am trying to get the java vision target example working and I need to put the sample images on the crio.

Download the presentation "autonomousScriptingExampleExplanation.ppt" from the following link: http://www.chiefdelphi.com/media/papers/2553 and go to slide 17 - there you will find instructions for FTP.

[iceberg_ssj]

Thanks for the help

[jwakeman]

I think the simplest way to ftp is to open internet explorer and enter ftp://10.XX.YY.2 in the address bar. Where xx yy is your team number, 10.0.63.2 for team 63.

[rbrown1]

I would make sure the depth of my grooves are more than 1/2 the diameter of the poly cord.

[Team 3705]

use a program like FileZilla to transfer your images...thats what we did...

[dellagd]

What can I say, I'm old school:

http://www.chiefdelphi.com/forums/sh...06&postcount=3

Originally Posted by dellagd

Hey. My team always gets this error with the subnet mask. If you wanna send a screenshot, that would be greaaaat. IDK why this happens, but it really isnt a big deal.

First ping the crio with ping --IP address of your crio-- (an example would be ping 10.26.07.2) and make sure you have a good connection

Then do as follows:

open up command prompt

type ren C:\Users\--InsertYourUserNameHere--\Documents\NetBeansProjects\--InsertYourProjectNameHere--\suite\image.suite robot.suite

type ftp --IP of the crio-- (Example would be ftp 10.26.07.2)

type cd ni-rt

type cd system

type send C:\Users\--InsertYourUserNAmeHere--\Documents\NetBeansProjects\--InsertYourProjectNameHere--\suite\robot.suite



Reboot the crio

What you just did was exactly what NetBeans wanted to do, just you did it manually. You ftp-ed into the crio and manually replaced the code and rebooted. You have sucessfully uploaded code the right way yourself!

I was gonna write a batch file for you, but this is just quicker

[dellagd]

Originally Posted by rbrown1

I would make sure the depth of my grooves are more than 1/2 the diameter of the poly cord.

I think somebody posted in the wrong thread