|
|
|
 Ideally, you'll make sure your drive system can handle some Irritating Failures without them becoming Paralyzing Failures. - Billfred [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Ideally, you'll make sure your drive system can handle some Irritating Failures without them becoming Paralyzing Failures. - Billfred [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
14-02-2012, 19:18
|
|||
|
|||
|
Re: Averaging one side with Encoders or two wheeled drive?
All motors are mounted onto on of two nanotubes by andymark, which has a uniform gear ratio. But I was told that not all motors were created equal, which is why I figured 4 Encoders would be better
And R50 is a bit vague in my opinion. Not entirely sure if its legal or not... |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode