Problem processing images on the Dashboard

[Greg McKaskle]

I haven't seen this before. The filter is a threshold, right? If it is white, you are possibly displaying with the wrong color palette, or perhaps you wired up the value to replace with in the threshold? Since this is a LV dashboard, it should be pretty easy to debug. Probe the images a step at a time and follow it across the diagram.

Greg McKaskle

[Ross3098]

We have tried to deploy it and it immediately closes with the error:

Image not large enough.
Color Threshold Failed.

A more accurate representation of our diagram would be this: (No screenshot sorry)

10.30.98.11 -> Read MJPG -> Color Threshold ->......

Again, we are using the Read MJPG vi connected to the camera ip address and having the IMAQ image that we attached to to Camera Image go into the Color Threshold Vi. The Color Threshold has all of the appropriate inputs and outputs connected (Color Mode, and Ranges).

We do not know what this means. We have tried all resolution sizes and settings for the camera.

[Greg McKaskle]

I haven't seen this myself, so I can only give you a few things to check. Make sure that you have an Image Create wired to the Get Image and another created and wired to the threshold.

Greg McKaskle