|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
||||
|
||||
|
Re: Stop Build
We are all done........ with the practice robot! =p but we are almost done with competition bot.
|
|
#17
|
|||||
|
|||||
|
We have nothing but a frame and a box of mecanum wheels. We are probably doomed.
|
|
#18
|
||||
|
||||
|
Re: Stop Build
We'll be done by Saturday, which would give us 3 days to drive and shoot and calibrate then comes the tough decision of what to take off the robot to withhold from Ship. Drive has technically been done for a week and a half now, just hasn't looked the prettiest.
Yes, I still call it Ship Day, simply because it sounds better than "Stop Build day". Edit: I don't normally celebrate posts, but I imagine celebrating my "pi" post is in order. Last edited by CalTran : 16-02-2012 at 01:13. Reason: Probably not a legitimate reason to edit |
|
#19
|
||||
|
||||
|
Re: Stop Build
We tested our ball manipulator today, and it "worked", so now we need to fix that, test the bridge lowerer, finish assembling the shooter, finish wiring, and drive, drive, drive!
|
|
#20
|
||||
|
||||
|
Re: Stop Build
We are done, though we have to finish our second bot for a demo a week after ship date... crunch 2.0
![]() Good luck to all of you! |
|
#21
|
||||
|
||||
|
Re: Stop Build
Aloha from Oahu!
Quote:
All in all, we have pretty much finished the robot and will begin practicing and debugging. Good luck! |
|
#22
|
|||
|
|||
|
Re: Stop Build
Oh, the 122 thing was just a snapshot. We're down to 115 now (Weight Watchers for robots!).
Bot is moving to the practice space today, I think. Now the drivers and programmers get to duke it out, for the next few days. Practice bot is in the works. But the builders just don't want to let go of the competition bot. Programmers say all the critical stuff is working but they need to tweak autonomous and work on automatic bridge balancing stuff. I am skeptical... (probably because my son is one of them and I know him pretty well!) But we are (oh knock wood like you've never knocked before!) well ahead of where we've ever been before. Now I just have to go check those bumpers and make sure they're 3/4"... |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|