Quote:
Originally Posted by Alan Anderson
Our programming testbed is an 8-slot cRIO. After we replaced the thick white 37-pin cable with the ribbon cable from the Kit of Parts, the accelerometer works fine with I2C.
You might have one of the boards that responds to the alternate address of 0xAC instead of the default 0x3A. Try changing that in the example code and see if it starts responding.
|
Thank you for verifying the accelerometer works on the 8-slot cRIO. We've successfully used the accelerometer at address 0x3A with an Arduino so that does not appear to be our issue.
The best we can all do for our kids as parents, mentors and world citizens, is to model [Gracious Professionalism] always: not to win an award, but because it is the right thing to do. - chapman1 [more] 
Threaded Mode