|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
|||||
|
|||||
|
Re: Team 166 2012 Robot
Quote:
|
|
#17
|
||||
|
||||
|
Re: Team 166 2012 Robot
Were back from reveal and we finally got some video of our shooter operating in a room with a high ceiling: http://www.youtube.com/watch?v=UxjSHXYgjiQ
But, In this video the shooter is limited to 6 volts by software, the only thing I know is that it is spinning at or below 4000 rpm. |
|
#18
|
|||
|
|||
|
Re: Team 166 2012 Robot
I like the robot, well done. However, doesn't the two part mechanism for putting down the bridge violate the single appendage rule? I might not be seeing it, but it doesn't appear to be one contiguous appendage outside the frame. If this indeed is the case, a quick fix might be just to tie a cable/string from one side to the other so that they are "contiguous".
|
|
#19
|
||||
|
||||
|
Re: Team 166 2012 Robot
Quote:
|
|
#20
|
||||
|
||||
|
Re: Team 166 2012 Robot
Ok, now that the robot is done here is pictures of it all put together:
![]() ![]() ![]() ![]() Final weight: 118.8 Pounds More picures in this web album: https://picasaweb.google.com/1080665...eat=directlink Last edited by klmx30302 : 23-02-2012 at 17:58. |
|
#21
|
||||
|
||||
|
Re: Team 166 2012 Robot
Hey 166 Great job good luck this year , had a great time hanging out with your team last year in Vegas .
|
|
#22
|
|||
|
|||
|
Re: Team 166 2012 Robot
Thanks again for the great time in Vegas last year. Vegas was amazing! (We even got to stay longer because our flight was cancelled!)
Good luck this year!! |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|