|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: Axis Camera issues
If the IP address won't stick, either configure it manually or download the latest camera config tool from the NI site. The one released at kickoff had a bug that left the camera network settings a bit inconsistent. On boot up, the camera fixes the inconsistency by doing a factory reset of those settings, so your IP address is modified.
Greg McKaskle |
|
#2
|
||||
|
||||
|
Re: Axis Camera issues
Thank you for the advice. I have been using the updated camera config tool. Also I have tried to manually set it using the AXIS management tool. Either way the camera seems to reset itself. We get the indicator light flashing red and green during operation. I haven't been able to find this in any AXIS documentation. Any more advice would be wonderful. Thank you.
|
|
#3
|
|||
|
|||
|
Re: Axis Camera issues
It is also pretty easy to mount the camera so that the mounting of the camera causes the reset button to be pressed all the time, or when the robot is bumped. You may want to verify that isn't happening.
Greg McKaskle |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|