|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Modifying the Window Motor
Yes.
Quote:
Quote:
Last edited by jason701802 : 19-02-2012 at 13:13. |
|
#2
|
|||
|
|||
|
Re: Modifying the Window Motor
Look closely at the regulation referenced above. It says you CAN modify output shafts, etc. The part in the blue box says, "Note that for the Window motors and the AndyMark gearmotor, the gearboxes are considered integral to the motor, thus the motor may not be used without the gearbox", is just saying you can't separate the motor and the gearbox". So you can modify the gearbox some, you just have to be sure it remains attached to the associated motor it came with.
|
|
#3
|
||||
|
||||
|
Re: Modifying the Window Motor
Quote:
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|