|
|
|
 Honestly, no one at a FIRST competition is gonna judge you. Chances are, there are least 20 people dorkier than you. - JohnnyB [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Honestly, no one at a FIRST competition is gonna judge you. Chances are, there are least 20 people dorkier than you. - JohnnyB [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
19-02-2012, 00:42
|
|||||
|
|||||
|
Re: Wiring a Fisher Gear Motor
You have to refer to r44
Application Minimum wire size 40A circuit 12 AWG (2.052mm) 30A circuit 14 AWG (1.628mm) 20A circuit 18 AWG (1.024mm) With that said, I would recommend soldering wires to the terminals of the fisher price motor. I find it difficult to put 12 gauge wire on the terminal and I usually use 14AG and 30 amps for the FP. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode