cRIO Vision Targeting - Please Help!

[dwmcc]

We're somewhat at a loss for vision. We have the Axis Camera M1011, and we've already used the setup axis camera tool to assign it an IP address. At this stage, we're trying to do the vision processing on the cRIO (depending on the amount of lag, we may later switch to processing on the computer).

Should I use the Rectangular Target Processing project (included with Labview) or should I use the NI Vision Assistant to process the images. Are you supposed to use one or another? We're at a loss for how to actually process the images in our project.

Thanks,
dwmcc