Camera Coding Failure

[gammabase]

We've been trying to get the camera working in our program, but after numerous unsuccessful attempts, and days of poring over the provided examples, we still have not come up with a solution. Can anybody provide us with a basic example of code that will take the camera image and display it on the dashboard?

Team 3328 NoHoRoBo

[Chiller]

Originally Posted by gammabase

We've been trying to get the camera working in our program, but after numerous unsuccessful attempts, and days of poring over the provided examples, we still have not come up with a solution. Can anybody provide us with a basic example of code that will take the camera image and display it on the dashboard?

Team 3328 NoHoRoBo

Did you set the camera up? Is its ip 10.te.am.11? If so then it would not be a programming error but an error with the camera itself.

[touchdownjesus4]

In our case after we set up the camera using the setup tool and connected it to the dlink, the camera feed came up automatically on the dashboard, we didn't have to program anything at all.

[cgmv123]

An issue was confirmed with the kickoff version of the setup Axis Camera. There is an update on the NI website.