Potential DSC Damage - Chief Delphi

Enlighten a man who sometimes has difficulty understanding why others stray outside the box, when the box appears to be an optimized and elegant solution. - JVN [more]

		Chief Delphi > Technical > Electrical
Potential DSC Damage

Thread Tools

Rate Thread

Display Modes

20-02-2012, 00:19

BitTwiddler BitTwiddler is offline

electronics/programming mentor

AKA: Mr Tanguay

FRC #1726 (N.E.R.D.S.)

Team Role: Mentor

Join Date: Oct 2008

Rookie Year: 2006

Location: Sierra Vista, AZ

Posts: 248

Re: Potential DSC Damage

Quote:

Originally Posted by slijin

All 3 lights on the DSC are still lit.

The 12V and GND lines of the sensors were never connected to the DSC.

As long as you were using the NPN version of the sensor (the model number you gave says it is) then I don't think you got any 12V into the DIO input so you should be OK there. You may need to look at the wiring to the sensor to see if there is a frame short there. I don't think the DSC is the source of the short but I could be wrong.

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 13:07.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.