|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Camera Coding Failure
We've been trying to get the camera working in our program, but after numerous unsuccessful attempts, and days of poring over the provided examples, we still have not come up with a solution. Can anybody provide us with a basic example of code that will take the camera image and display it on the dashboard?
Team 3328 NoHoRoBo |
|
#2
|
|||
|
|||
|
Re: Camera Coding Failure
Quote:
|
|
#3
|
||||
|
||||
|
Re: Camera Coding Failure
In our case after we set up the camera using the setup tool and connected it to the dlink, the camera feed came up automatically on the dashboard, we didn't have to program anything at all.
|
|
#4
|
||||
|
||||
|
Re: Camera Coding Failure
An issue was confirmed with the kickoff version of the setup Axis Camera. There is an update on the NI website.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|