|
|
|
 it's possible, based on his widespread approval, that Frank is in fact a collection of kittens in a human suit - Andrew Schreiber [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| it's possible, based on his widespread approval, that Frank is in fact a collection of kittens in a human suit - Andrew Schreiber [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: C-RIO II Ethernet Port Damaged
How would we go about getting a replacement? Contact NI directly? Today was the first day we were not having trouble with our bridge and we had just switch to wireless for the first time today. Wireless wasn't working so smoothly so just for driving practice we reconnected the direct ethernet connection. We always had someone holding the tether to control the slack, but there may have been an occasion where the tether was too taut.
|
|
#2
20-02-2012, 21:00
|
|||
|
|||
|
Re: C-RIO II Ethernet Port Damaged
Contact NI here https://decibel.ni.com/content/commu...ew=discussions or via the phone number.
Greg McKaskle
|
|
#3
21-02-2012, 10:37
|
|||||
|
|||||
|
Re: C-RIO II Ethernet Port Damaged
In future, add a port extender to the cRIO and tie a loop of it down to the chassis, so no tension is put on the cRIO port when it gets yanked..
It the end of that gets destroyed it's cheap to replace.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
